You have no items in your shopping cart.

UFH Covering Layer Cement Fibre Board Foiled

The Cement-Faced Underfloor Heating Board is a low-profile insulated panel designed to provide an efficient base for water-based underfloor heating systems.
0 Types Available

Cement-Faced Underfloor Heating Board

The Cement-Faced Underfloor Heating Board is a low-profile insulated panel designed to provide an efficient base for water-based underfloor heating systems.

Durable cement coatings on both faces provide excellent strength and stability. The upper surface is suitable for the direct application of tiles, while wood flooring can be installed using an appropriate underlay. This helps reduce the number of additional floor layers required and supports a faster, more efficient installation.

Each board is fully grooved on one face to accommodate either 12 mm or 16 mm underfloor heating pipe. With a total thickness of only 20 mm, it is particularly suitable for renovation and retrofit projects where floor build-up must be kept to a minimum.

The boards can be installed over both timber and concrete subfloors, making them a versatile solution for residential and commercial underfloor heating projects.

Key Benefits

  • Low-profile construction with a thickness of only 20 mm
  • High compressive strength of 300 kPa
  • Durable cement coating on both faces
  • Suitable for installation over timber and concrete subfloors
  • Accepts tiles directly onto the upper surface
  • Suitable for wood flooring when used with an appropriate underlay
  • Available for either 12 mm or 16 mm underfloor heating pipe
  • Pre-grooved design supports quick and accurate pipe installation
  • Consistent 150 mm pipe centres
  • Lightweight and easy to handle, cut and install
  • Helps distribute heat evenly across the finished floor

Product Specifications

Board Size 1200 × 600 mm
Board Thickness 20 mm
Coverage per Board 0.72 m²
Compressive Strength 300 kPa
Compatible Pipe Sizes 12 mm or 16 mm
Pipe Centres 150 mm
Compatible Subfloors Timber and concrete

Typical Applications

  • Low-profile underfloor heating systems
  • Residential renovation and retrofit projects
  • New-build heating installations
  • Timber and concrete subfloors
  • Tiled floor installations
  • Wood flooring installed over a suitable underlay

Please note: Always select the board configuration that matches the specified pipe diameter. The final floor covering should be installed in accordance with the flooring manufacturer’s recommendations.

*
*
*
*

Cement-Faced Underfloor Heating Board

The Cement-Faced Underfloor Heating Board is a low-profile insulated panel designed to provide an efficient base for water-based underfloor heating systems.

Durable cement coatings on both faces provide excellent strength and stability. The upper surface is suitable for the direct application of tiles, while wood flooring can be installed using an appropriate underlay. This helps reduce the number of additional floor layers required and supports a faster, more efficient installation.

Each board is fully grooved on one face to accommodate either 12 mm or 16 mm underfloor heating pipe. With a total thickness of only 20 mm, it is particularly suitable for renovation and retrofit projects where floor build-up must be kept to a minimum.

The boards can be installed over both timber and concrete subfloors, making them a versatile solution for residential and commercial underfloor heating projects.

Key Benefits

  • Low-profile construction with a thickness of only 20 mm
  • High compressive strength of 300 kPa
  • Durable cement coating on both faces
  • Suitable for installation over timber and concrete subfloors
  • Accepts tiles directly onto the upper surface
  • Suitable for wood flooring when used with an appropriate underlay
  • Available for either 12 mm or 16 mm underfloor heating pipe
  • Pre-grooved design supports quick and accurate pipe installation
  • Consistent 150 mm pipe centres
  • Lightweight and easy to handle, cut and install
  • Helps distribute heat evenly across the finished floor

Product Specifications

Board Size 1200 × 600 mm
Board Thickness 20 mm
Coverage per Board 0.72 m²
Compressive Strength 300 kPa
Compatible Pipe Sizes 12 mm or 16 mm
Pipe Centres 150 mm
Compatible Subfloors Timber and concrete

Typical Applications

  • Low-profile underfloor heating systems
  • Residential renovation and retrofit projects
  • New-build heating installations
  • Timber and concrete subfloors
  • Tiled floor installations
  • Wood flooring installed over a suitable underlay

Please note: Always select the board configuration that matches the specified pipe diameter. The final floor covering should be installed in accordance with the flooring manufacturer’s recommendations.

View as Grid List
Sort by
Display per page
RHS32-053
Covering Layer Cement Fibre Board (foiled) - 1200mm x 600mm x 6mm
Filters